Cost-Optimized IO Controller Board with one FMC socket

The DAMC-Z7IO is a ZYNQ-7000 based IO controller board with one FMC socket in MTCA.4 form factor. The FPGA on this carrier is the Xilinx XC7Z030 (or XC7Z035 or XC7Z045 as assembly variants).
The board is designed to offer 48 general purpose IO Pins with 3.3V and 5.0V logic levels. The programmable logic ranges from 125k to 350k logic cells, 400 to 900 DSP slices and 4x to 8x Multi-Gigabit Transceivers running at up to 12.5Gbps. All MTCA.4 backplane ports are connected to the FPGA. Gigabit Ethernet (Port 0) is connected to Processing System (ARM) and provides convenient access for development and for running application servers. Eight M-LVDS Timing/Trigger signals and three TCLK lines are connected as well. The board features a DDR3 memory block with 1GB (32bits) connected to PS, operating at 1066 MHz. The board has one FMC LPC socket that has 2/4 transceivers connected (HPC connector). The RTM interface is designed according to class D1.0 and carries full 48 LVDS lines. The board can support all class compatible digital RTMs from DESY, such as DRTM-AD84 and DRTM-PZT4.

Main Features
  • 7-Series FPGA: XC7Z030 (and higher)
  • 48 bidirectional IOs: 3.3V and true 5V
  • FMC socket with four fast transceivers (up to 12.5 Gbps)
  • Full Backplane and RTM connectivity
  • Dual-Core ARM Cortex-A9 Processor
  • PCIe x2 Gen.2 supported
  • Flexible clocking system with front panel SMA connector for external clock input
  • Standalone mode (runs without CPU Module)
  • Supported by all Xilinx development tools

DESY can modify this product to meet special customer requirements. If you are interested in getting further information or purchasing the board, please contact us!

application/pdf Datasheet (898KB)